When Tianma is used as a fresh sale or sale, it should be kept free from impact, not beaten, and free from mechanical injuries after harvesting. Then soft brush is used to gently brush off the sand on the hemp body, and it is put into a soft-lined wooden box or plastic box. can. If dry hemp is processed, it will take longer. Generally, boiled water and cage steaming are used for cooking, and then it is dried or dried. In the actual production, cage steaming and bake drying are generally used to dry the products. The operation process is: Gastrodia elata selection → Clean water wash → Steam fire → 50°C for 60 minutes, 60°C for 60 minutes, 70°C for 60 hours Minutes, bake at 80 °C till drying.
1, election. According to the weight of gastrodia, the 50-gram difference classification is carried out, that is, 50-99 grams, 100-150 grams, 151-200 grams, and 201 grams or more are respectively placed and processed, and unqualified products such as sickle and rotten linen are discarded at the same time. .
2, washed. Clean the surface of the body with clean water.
3, cage steam. The washed Tianma steamed into the cage. The general practice is: After the fire boils the water, first put the largest gastrodia, steaming about 5-6 minutes after the big fire, and then put the next big gastrodin to continue steaming, 5-6 minutes after the head slightly smaller Gastrodia, steaming again for about 5-6 minutes, and finally into the small gastrodia, to maintain the fire after 5-6 minutes, generally all steamed. During the steaming process, attention should be paid: Whenever one tray is filled with raw hemp, the original cage should be lifted and the new steamer should be placed in the lowest level. Examine the degree of ripeness to be ripe, no hard core shall prevail.
4, bake dry. Brick and billets are heated and burned until the temperature reaches 50°C. The cooked mat is arranged in a single layer and is inverted every 30 minutes. The temperature is increased by 10°C every 60 minutes. When the maximum temperature is 80°C, the temperature is no longer raised. The temperature is maintained until it is dried. . The main points of the bake-drying process are: When the bake is dry, the body is very soft. The jute body is lightly pressed with a clean and smooth wood board. The purpose is to make it flat and straight, with higher transparency, and easier to use in use. Smashing, but also easy to measure, the work can be carried out with the baking process flip body hemp.
To improve the commodity value of gastrodia, we can start from three aspects and do a detailed job: First, strict classification. Each cooked and dried operation uses only one size of Gastrodia to facilitate the control of the heat and operation. Second, after washing the hemp body, the rough appearance, spots, etc. of the gastrodia were removed using a rolling machine. Third, during the baking process, there will be air bubble protrusions under the skin of the worm body, which can be punctured and deflated using very fine bamboo needles, and then smoothed and leveled.
A simple device to assist walking, usually a wooden or metal stick.
Crutches are an important medical rehabilitation aid. They are divided into walking sticks, elbow sticks and axillary sticks. Walking sticks are mainly used for mild needs, such as the elderly or climbers. Walking sticks are not products for the disabled. 
Crutch,Peg Leg Crutch,Adjustable Crutch for Elderly,Retractable Walking Cane
Ningbo Queen Electronic Science Technology Co., Ltd , https://www.queenmeds.com