Kailang salt spray test machine use and maintenance First, the environmental requirements 1, the equipment must have more than 600mm space;
2. There is no high concentration of dust and corrosive substances around the equipment;
3, the temperature around the equipment should be maintained at 15 ° C ~ 30 ° C;
4. The equipment is not directly exposed to direct sunlight or other heat sources;
5. There is no strong airflow around the equipment. When the surrounding air needs to be forced to flow, the airflow should not be directly blown onto the cabinet;
6. The fluctuation of the power supply voltage of the equipment is ≤±10%.
Second, note 1, please confirm the connection of the power supply before the equipment is running;
2. Confirm that the gas supply system is normal;
3. Exhaust hole inspection;
4. Confirm that the automatic water supply system is normal.
5. When preparing the salt solution, please use analytical grade NaCl and distilled water or deionized water to prepare, and use it immediately;
6. Confirm the tightness of the insulated sink;
7. After each test, the power supply, air source and water source should be cut off to avoid the equipment being in the standby state for a long time.
3. Routine maintenance of salt spray test machine 1. At the end of each test, it is recommended to clean the equipment test cabinet (including spray chamber, salt solution chamber, preheating water tank and sealed water tank) with clean water to keep the equipment clean;
2. When cleaning the inside of the box, please note:
(1) Protection of the sheath of the temperature sensor;
(2) Protection of glass filters and glass nozzles (cannot use needles or any hard objects to pass through filters or nozzles);
3. In each test or at the end of the test, the solution of the standard measuring cup should be poured out and cleaned in time to avoid the accumulation of crystals in the salt solution and affect the calculation of the settlement.
2. There is no high concentration of dust and corrosive substances around the equipment;
3, the temperature around the equipment should be maintained at 15 ° C ~ 30 ° C;
4. The equipment is not directly exposed to direct sunlight or other heat sources;
5. There is no strong airflow around the equipment. When the surrounding air needs to be forced to flow, the airflow should not be directly blown onto the cabinet;
6. The fluctuation of the power supply voltage of the equipment is ≤±10%.
Second, note 1, please confirm the connection of the power supply before the equipment is running;
2. Confirm that the gas supply system is normal;
3. Exhaust hole inspection;
4. Confirm that the automatic water supply system is normal.
5. When preparing the salt solution, please use analytical grade NaCl and distilled water or deionized water to prepare, and use it immediately;
6. Confirm the tightness of the insulated sink;
7. After each test, the power supply, air source and water source should be cut off to avoid the equipment being in the standby state for a long time.
3. Routine maintenance of salt spray test machine 1. At the end of each test, it is recommended to clean the equipment test cabinet (including spray chamber, salt solution chamber, preheating water tank and sealed water tank) with clean water to keep the equipment clean;
2. When cleaning the inside of the box, please note:
(1) Protection of the sheath of the temperature sensor;
(2) Protection of glass filters and glass nozzles (cannot use needles or any hard objects to pass through filters or nozzles);
3. In each test or at the end of the test, the solution of the standard measuring cup should be poured out and cleaned in time to avoid the accumulation of crystals in the salt solution and affect the calculation of the settlement.
Clarithromycin Capsules,Anti Infective Drug,Clarithromycin Capsule,Anti Infective Clarithromycin
SHANDONG XINHUA PHARMACEUTICAL Co., Ltd. , https://www.sdxinhuapharm.com