Features of 1SECESPOL-B series heat exchanger 1.1 Design concept SECESPOL-B series heat exchanger adopts advanced wire-type bellows based on the design of traditional double-tube plate, which creates turbulence in the liquid outside the pipe or in the pipe. Increased heat exchange area and improved work efficiency. At the same time, using zui's small gap design, Zui greatly reduces the formation of the stagnant zone, and there is no dead angle, which can completely drain the accumulated water.
1.2 Surface Finishing The smooth surface of the SECESPOL-B series heat exchanger is completed by electropolishing. Electropolishing removes exposed impurities together with the surface layer and greatly alleviates the inherent surface tension during mechanical polishing. More importantly, it forms an excellent film on the surface and enhances corrosion resistance.
1.3 Installation method The SECESPOL-B series heat exchanger adopts a clamp-type quick-fit interface that is easy to disassemble and has higher hygienic precision. As shown in Figure 1, the sanitary joints are suitable for the special connection structure and precise manufacturing process. The gasket is matched to ensure that the inner diameter of the connector is perfectly aligned and the gap is minimized.
1.4 High-efficiency heat exchange SECESPOL-B series heat exchangers reduce the wall thickness as much as possible on the basis of ensuring safe operation. The wall thickness of each heat exchange tube is only 0.6mm, which greatly improves the hot and cold fluid. The heat transfer effect is more than three times that of the conventional heat exchanger under the same conditions, which improves the working efficiency.
1.5 Mechanical strength SECESPOL-B series heat exchangers use integral stainless steel welding to avoid the possibility of dead angles and leakage; and improve the temperature and pressure resistance, withstand voltage of 1.6MPa and test pressure of 3.2MPa, ensuring safety.
1.6 Post-maintenance SECESPOL-B series heat exchangers have a low tendency to foul, and even after scaling, the cleaning of the scale is very simple.
2 In the application of water for injection system comparison Currently, in most pharmaceutical enterprises, there are generally three types of water-heat exchangers for water for injection systems: traditional tubular heat exchangers, plate heat exchangers, and secespol heat exchangers. A comparison is made below by Table 1, which illustrates the advantages of the secespol heat exchanger.
The small size of the gasket has a heat transfer coefficient of 1000 ~ 30003000 ~ 50003000 ~ 7000
Stagnation area large and small service life 3 to 5 years 1 to 2 years replacement gasket 10 years or more installation is not convenient, convenient and convenient operation cost high and low maintenance disassembly cleaning disassembly cleaning chemical cleaning 3 conclusion through the SECESPOL-B series heat exchange Comparing with the traditional tubular and plate heat exchangers, we can see that the SECESPOL-B series heat exchanger combines the advantages of plate heat exchangers and traditional tube heat exchangers, and is more suitable for application. Injection water system.
Laser distance measure is a very convenient tool for various types of applications in industries, construction and house decoration. Laser distance meter is a very useful device which gives accurate measurement of distance, area and volume especially in large areas such as rooms, apartments, buildings, real estates, factories, warehouses, infrastructures, gardens, roads, and many other applications requiring accurate results for distance , area and volume measurement.
Trade your heavy tape measure for laser
rangefinder, which let you simply take measurements with one hand. No matter
your job, the laser rangefinder will help you measure much farther, with
greater accuracy and in more situations, saving you money and time.
Specification:
|
Product Model: |
JX40 |
|
Accuracy: |
±1.5mm (0.06 inch) |
|
Measuring Unit: |
metre/inch/feet |
|
Measuring Range: |
0.03~40m (0.01 to 131 ft) |
|
Measuring Time: |
0.1~4 seconds |
|
Laser Class: |
Class II |
|
Laser Type: |
635nm, <1mW |
|
Waterproof & Dustproof : |
IP54 |
|
Auto Laser Off: |
60 seconds |
|
Automatic Power-off: |
480 seconds(8 minutes) |
|
Lighting: |
white LED |
|
Datum Option: |
Can choose Front edge or end piece edge as datum |
|
Battery Status: |
Y |
|
Signal Strength Display: |
Y |
|
LCD display: |
2 inch large screen |
|
Display illumination and multi-line display: |
Max 2 displays |
|
Data Memory: |
Y (allow 20 values) |
|
Backlight display: |
Y |
|
Continuous Measurement: |
Y |
|
Min/max Measurement: |
Y |
|
Addition/Subtraction(Distance/Area/Volume): |
Y |
|
Area/Volume/Pythagoras Measurement: |
Y |
|
Battery Type: |
AAA alkaline battery(2*1.5v ) |
|
Weight: |
about 80g |
|
Dimensions(L*W*H): |
4*2*11.5cm |
|
Auto correction and error report technology: |
Y |
|
Operating Temperature: |
0-40 ℃(32-104 ℉ ) |
|
Storage Temperature: |
-20~60 ℃ (-4~140 ℉) |
Laser Distance Meter,Laser Distance Measure,Laser Rangefinder,Laser Distance Gauge
Chengdu JRT Meter Technology Co., Ltd , https://www.cdlaserdistancesensor.com