1. Strictly follow the product instructions
The power must be equipped according to the requirements of the machine. If the power is too large, it may easily damage the parts (such as the drive shaft and bearings). The oversized machines cannot work normally. Before the machine is put into use, the operator must be trained to be familiar with the machine's performance and safety operation procedures. Trial cuts must be made and the machine must be adjusted and maintained before it can be used officially.
2. To correctly understand the productivity of imported machine labels
Some products are marked with unit time and kilograms, and they are marked with walking speed. As the silage cutter not only cuts but also crushes, the work efficiency of the crushing part directly affects the working efficiency of the entire machine. Some people mistakenly believe that the foreign machine has a large horsepower, so the use of exceeding the limit will not only damage the machine prematurely, but also This delays the golden harvest period, which is unfavorable to both the client and the operator. Therefore, the machine's walking speed should be determined according to the actual production in the field and the given productivity of the machine.
3. Preparatory work should be carried out before the harvesting operation
Firstly, we must level all the Et埂 in the land so that its height does not exceed lOcm so as to avoid damage to the cutters and guards of the harvester, and to pick up iron wires, iron blocks and other hard objects on the surface so as not to damage the comminuting parts of the machine. .
4. Planting multiple ear corn varieties suitable for silage
This kind of corn has a high yield and is easy to harvest. Although the S704 has a high yield, there are few tillers, and the stalks are thick and difficult to harvest. Since the sowing time of silage corn is relatively concentrated, the harvesting time is also very concentrated. If the machine is equipped with a demand that can not meet the peak operation period, the corn harvested in the later period can only be yellow, which is not worthwhile. Therefore, silage corn sowing time is required to be appropriately staggered in order to lengthen the harvest period. There is also a need to equip the machine with the peak workload of silage corn harvesting operations, generally increasing the amount of equipment by 30% of normal operations.
5. Do a good job of organizing the harvest of silage corn
From the understanding of the situation, the main reason for the inefficient use of imported machinery is the improper organization of production. First, the farmers have small planting area, the idle time of the mechanical operation is greater than the pure operating time, the machine turns and has many empty lines, etc. The time for pulling the wagons is long and the utilization rate of the machine is low; second, the operator rushes into battle, without training, and imports. The performance of the machine is not known, and man-made failures are caused by operational mistakes. Third, sellers interest in seizing the market, stalls are paved, fronts are pulled long, and after-sales services cannot keep up. Therefore, the cultivation of silage corn should be scaled up as soon as possible. Users should consult the experts when selecting machines, and sellers should base themselves on long-term and quality services.
Tylosin Injection,Veterinary Injection,Inj Oxytetracycline,Ivermectin 1 Injectable
NINGBO VOICE BIOCHEMIC CO. LTD , https://www.pharma-voice.com