Precautions for use of the light incubator 1. The light incubator is not allowed to be inverted or tilted more than 45 degrees during handling.
2. After the light incubator has landed, if the ground is uneven, it should be leveled, and the space around the equipment should be more than 30 cm.
3. The device should be kept away from electromagnetic interference sources and the ground wire of the device should be effectively grounded.
4. When the light incubator is in normal operation, the contents of the box should not be over-squeezed, and the air circulation inside the box should not be affected to ensure uniform temperature inside the box.
5. When there is no need for lighting in the box, the lighting switch should be placed in the “off†position to avoid affecting the upper temperature and prolong the service life of the lamp.
6. The surface of the tank wall and the box should be wiped frequently to keep it clean and increase the transparency of the glass. Do not wipe the outer surface with acid, alkali or other corrosive solutions.
7. If the light incubator is not used for a long time, unplug the power cord. It should be operated regularly (2 to 3 days) on a regular basis (usually once in the first quarter) to remove moisture from the electrical parts and avoid damage to the equipment.
8. When the light incubator is not in use, it should be treated with moisture. The specific method is as follows: first clean the box, then set the temperature at 40 °C, run for 5 hours, and open the door every two hours to release the moisture. Unplug the power plug after handling.
9. Maintenance and repair of equipment should be carried out by professionals to avoid accidents.
Abnormal imagination in use, please cut off the power and get it with our company in time!
Skin Scrubber,Skin Care Scrubber,Best Skin Scrubber,Ultrasonic Skin Scrubber
Shenzhen Jie Zhong Lian Investment Co., Ltd. , https://www.szmeizon.com