The Chinese medicine pellet making machine is a new generation of pelletizing equipment developed by the factory for the production of different pills such as Xiaomiwan, Water Pills and Concentrated Pills. Its main steps are as follows:
1. Before use, remove the upper cover and the gear cover. A few drops of non-hydrated edible oil must be added to each oil eye, and then wipe the four rollers and the parts in contact with the pill with medical alcohol for disinfection. .
2. Reinstall and reset the upper cover and the gear cover, turn on the power, turn on the switch, and turn the machine for 1-2 minutes.
3, will be evenly distributed pellets. Put an appropriate amount into the extrusion slot, press the cake, then put the cake into the striping tank, and then make the pellets into the pellets and smash them into the pellets.
4. Water pill: Put the medicine surface (0.1kg) into the coating machine, gradually put it into the rice soup, form the granules, and then spray the edible water at intervals, and gradually roll into pellets.
5. Coating: After the pill is made, it can be placed in a water pill coating machine and wrapped into a white, red and other outer garment.
6. Drying method: After the pill is made, the pill can be dried by entering the pill dispenser for electric heating. It can be dried by hot air with a hair dryer or dried directly in the sun.
7. Polishing method: Put the pill in the water pill coating machine and roll continuously. The longer the rolling time, the smoother the surface.
1. Before use, remove the upper cover and the gear cover. A few drops of non-hydrated edible oil must be added to each oil eye, and then wipe the four rollers and the parts in contact with the pill with medical alcohol for disinfection. .
2. Reinstall and reset the upper cover and the gear cover, turn on the power, turn on the switch, and turn the machine for 1-2 minutes.
3, will be evenly distributed pellets. Put an appropriate amount into the extrusion slot, press the cake, then put the cake into the striping tank, and then make the pellets into the pellets and smash them into the pellets.
4. Water pill: Put the medicine surface (0.1kg) into the coating machine, gradually put it into the rice soup, form the granules, and then spray the edible water at intervals, and gradually roll into pellets.
5. Coating: After the pill is made, it can be placed in a water pill coating machine and wrapped into a white, red and other outer garment.
6. Drying method: After the pill is made, the pill can be dried by entering the pill dispenser for electric heating. It can be dried by hot air with a hair dryer or dried directly in the sun.
7. Polishing method: Put the pill in the water pill coating machine and roll continuously. The longer the rolling time, the smoother the surface.
The surface is slightly sugary, the color is fresh and crisp, sweet and refreshing, the original fruit flavor is rich, the color, fragrance, taste and shape are good. The representative products mainly include plum series products, as well as sugar bergamot, honey citrus, fig and so on. Back sand products, dry surface, slightly icing sugar, fresh color, chic shape, crispy entrance, sweet taste, representative products have jujube series products, as well as golden silk kumquat, sugar bayberry, sugar cherry, etc.
Green Raisins,Cranberry Snacks,Hawthorn Snacks,Dried Tangerine Peel Plum
Hangzhou Aiyomi food co.,LTD , https://www.aiyomisnacks.com