(1) Reduce the load quality. During the running-in period, the load of agricultural vehicles shall not exceed 80% of their rated load, and trailers or other implements shall not be towed. It is advisable to drive first within a few tens of kilometers before starting to use it, and gradually increase the quality of the load. The gears used for driving under various load qualities must be raised from low to high, and the gears must be run in. The common gears must be run-in.
(2) Control speed. The maximum speed of general agricultural vehicles should not exceed 40km/h, and the speed limit device must not be removed at the same time.
(3) Control the engine work greenhouse. When the agricultural vehicle is running in the winter, the engine should be preheated to above 40oC before starting. During driving, the temperature of the cooling water should always be kept in the range of 75~95oC.
(4) Select high-quality fuel and lubricating oil. During the running-in of agricultural vehicles, diesel with high cetane number and low viscosity, good quality lubricant should be used to improve the lubrication conditions of various parts and to prevent the engine from working rough.
(5) Choose a good road. Agricultural vehicles should not run on poor roads during the break-in period, and should not climb over steep slopes to reduce the vibration and impact of mechanical parts and prevent excessive load.
(6) Do not start the engine and stop the throttle when it is parked. The starting and acceleration should be gentle, and the shift should be timely. Do not use emergency braking as much as possible.
(7) Strict implementation of maintenance provisions during the break-in period. In order to ensure the quality of running-in, before the start of running-in, the entire vehicle should be cleaned, and the various parts of lubricant, grease and special fluid should be inspected and replenished to check the fasteners of each part. After driving for 500km, clean the engine lubrication system and the chassis gearbox and replace the lubricant; add lubricant to the entire vehicle lubrication point, check the brake performance and the technical condition of the piping and fasteners of each department, and tighten as necessary. Solid and adjustment; tightly fix the cylinder head and the bolts and nuts of the intake and exhaust pipes, check and adjust the valve clearance. After the completion of the run-in period, it is necessary to combine the key points of maintenance, to perform cleaning and oil change of the engine lubrication system, transmission, and differential hub, to release sediment from the fuel tank, to clean the filters, and to adjust or remove the limitations of the engine. Speed ​​device.
Tea Extract supplier Organic Herb Inc's range of products include: Tea Polyphenols, egcg (Epigallocatechin gallate), L-Theanine, Green Tea Extract, Instant tea powder, Oolong Tea Powder, Black tea extract (Theaflavins) ect.
A green tea extract is a herbal derivative from green tea made from the leaves of Camellia sinensis plant .Organic Herb Inc provide tea extract that is obtained from organic fresh source and processed through high standard manufacture method . The tea extract is sometimes used as weight loss dietary supplements and in alternative medicine because it catains antioxidant ingredients – mainly green tea catechins (GTC).It has also been shown that tea extract offer antioxidant, anti-inflammatory, anti-allergic, antibacterial and antiviral properties.Originated in southwestern China ,tea is initially used as a medical drink due to its energizing effect .Nowadays ,scientifically researches have proved the effectiveness of green tea extract as a food additive and dietary supplement component in fields including nutraceuticals, drinks, functional beverages, food production and cosmetics.
Tea Extract,Green Tea Extract,Tea Seeds Extract,Chrysanthemum Flower Extract
Organic Herb Inc. , http://www.extracts.pl