Breaking chopsticks is the most effective measure to prevent the occurrence of cockroaches, and it can also reduce feed grain costs. The time to break the chopsticks is between 10 days and -15 days, when the chopsticks do not cause a strong stress response. Smaller chickens cannot be broken prematurely. Usually only one feeding cycle is broken. Because in the breeding period, the broiler chickens often adopt open-breeding, often feeding vegetables and grass, and require a certain length of pupa. Check the health status of the flock before weaning and find out that the diseased chickens and weak chickens should be singled out and raised separately, and wait until they recover. It should be noted that the flock cannot be interrupted when the immunization period and the ambient temperature do not adapt. Three days before and after the break should be added 20 grams of vitamin B per ton of feed, in order to facilitate coagulation, other vitamins also increased by 2 times. If there is a bloody chicken with a spastic tip after a broken sputum, it should be promptly filled to stop the bleeding. After sinking, sink troughs are to be filled to prevent accidental bumps from hitting sink troughs. 2 days - 3 days before and after breaking the crucible should be added to the drinking water in the electrolysis multidimensional to prevent stress, the amount of 0.05 kg / 100 kg of water. It is advisable to use a special fault switch, such as a pedal breaker. The length of the broken jaw was 1/2--2/3 in the upper jaw and 1/3 in the lower jaw (from the nostrils to the malleolus). When the knife breaks, the blade burns to brownish red. Hold the chicken in your hand. Hold your thumb against the back of the chicken's head. Hold your index finger against the lower jaw of the chicken and press the throat softly. Shrink tongue. Break time is about 1 second - 2 seconds. Each blade can break 100,000 chicks.
5 Axis Cad Cam Dental Milling Machine is the champion in dental field. The Dental Milling provides dynamic flexibility with a built-in, 5-axis dental automation system and an "open" architecture that integrates with virtually any scanner and CAD/CAM software. This provides the user with the agility to produce a wide range of dental restoration components based on demand -- including crowns, bridges, abutments, implant-carried resorations. Plus, the JD-MT5 accommodates and supurbly machines a variety of dental materials including titanium, chrome-cobalt, zirconium and more! The JD-MT5 was developed specifically and exclusively for dental milling applications. All specifications from machine size to performance were designed for the efficient handling and milling of dental blanks (or material pucks). the the Cnc Dental Milling Machine will can satisfy all your need.
5 Axis Dental Milling Machine
Dental Milling,Cad Cam Milling Machine,5 Axis Cad Cam Dental Milling Machine,5 Axis Cad Cam Dental Milling Machine
Shandong Carved Intelligent Technology Group Co.,Ltd , https://www.demetdent.com