Gear oil pump repair after wear

1. Repair of the drive shaft and bushing of the diesel engine gear oil pump After the wear of the drive shaft and the bushing, the weight of the drive gear itself and the radial thrust generated when the driven gear meshes make it easy to produce uneven wear on the shaft and the bushing hole, which increases the clearance. Therefore, the oil will leak due to the increase of the gap during operation, and the amount of oil supply will decrease.
After the shaft and bushings wear out, use the bushing or bushing method to restore the fit clearance. When the journal wear is slight, simply press out the old bushing and replace it with a new one, and the shaft is generally not repaired so that the fit clearance can be restored to the allowable range. When the shaft and bush wear are severe and the clearance increases greatly, not only the bushing must be replaced, but also the shaft is chrome plated or vibrated to increase the diameter and then ground to a standard size to restore the journal. Fitting requirements for bushings.
2. Repair of the casing and gear teeth of the pump casing After the wear of the pump casing and gear teeth, the pump oil quantity has a great influence. When the shaft and the bushing or the shaft hole are seriously worn, the top surfaces of the teeth and the inner surface of the pump housing will have undesired contact. Because the pressure of the oil chamber is higher than that of the oil chamber, under the effect of pressure difference, the top of the gear is in contact with the inlet of the pump casing. Therefore, the inner cavity of the pump casing is worn more here, so that the internal cavity and the tooth The top clearance increases. As a result, the pressure difference between the oil pump inlet and outlet oil chambers is reduced, and the scraping and oil pressure of the gear teeth are reduced, resulting in a drop in the oil supply pressure and a decrease in the amount of pump oil. The wear of the pump casing cavity is generally repaired by a bushing method.
Secondly, due to the wear of the gear teeth in the tooth thickness direction, the meshing gap of the main and driven gears is increased. The wear is characterized by a heavier wear on one side, so the gear can be turned 180 degrees to use.
3. There is a certain gap between the end surface of the repair gear after the gear end surface and the pump cover are worn out and the inner surface of the pump cover, and the end surface gap is called. The wear caused by the contact surface between the end surface of the gear and the inner surface of the pump cover will increase the gap of the end surface. When the limit is exceeded, the oil quantity of the pump will be significantly affected.
When the end face of the gear is worn, the end face can be flattened and the disassembled surface of the oil pump housing can be ground at the same time to ensure that the end clearance of the pump is within the required range.

Goji Berry is taken as one of the most famous plants, which can be both for medical and eating use. The history of goji berry up-picking and for eating use has a long history of 4000years in China. People from different social hierarchies, from the emperor to ordinary people, take goji berry as a good component of medical prescriptions. Goji berry enjoys a great popularity from ancient to modern times, at home and abroad and it has a long lasting and profound life preservation culture.

Ningxia Goji Berry enjoys a great fame around the global due to its high quality standard; meanwhile, it is the only protected product of geographical identity in China, goji berry has a great popularity describes as "goji berry of the world is in China, goji berry of China is in Ningxia and Ningxia`s goji berry is the best".lycium barbarum

Specification:

 

Ningxia goji berry is categorized into 5 levels for experimental use. The fruit particles are required to have evenness in shape, with juicy fruit but not dry particle with impurities, humidity or bitten by insect.

Top Level:≤ 250grains/50g   

Excellent Level:≤ 280grains/50g

Superfine Level:≤ 370grains/50g  

First Rate:≤ 580grains/50g

Second Rate:≤ 900grains/50g

 

2. Identification

 

Color: The color of Ningxia goji berry should be red or dark red and lack luster.

 

Shape: Ningxia goji berry has big spindle size in shape with thin skin and full pulp. The particle is somewhat above normal size with style trace at the front of the particle and white stipe trace at the bottom.


Flavor: Ningxia goji berry is astringent at first bite then sweet, without ill-smell.


Goji Berry

Goji Berry,Goji Berry Dried,Ningxia Goji Berry,Fresh Goji Berries

Ningxia Bairuiyuan International Trading Co.,Ltd , http://www.cngoji.com

Posted on