The blast drying oven provides dry, baking, waxing and sterilization for industrial and mining enterprises, laboratories and scientific research units. The microcomputer intelligent binocular temperature control system has temperature control protection, which is accurate and reliable. The working temperature is arbitrarily set, and the deviation alarm function is provided for the air inlet switch to be free from hot air circulation. Because the equipment is in a state of high temperature and constant temperature for a long time, the blast drying oven needs proper maintenance and maintenance.
1. Do not put flammable materials in the dry box without explosion-proof device.
2. Before use, you must pay attention to whether the power supply voltage used is consistent. When using, the power outlet ground wire must be grounded as specified.
3. After each use of the blast drying oven, the power supply must be cut off, and the inside and outside of the box should be kept clean. Hang the corresponding logo after cleaning.
4. Do not over-squeeze the contents of the box, and leave room for natural convection of the air so that the humid air can accelerate on the wind top.
5 should regularly check whether the silver contact of the temperature regulator is hairy or uneven. If it is, use the fine gauze to level the contact, then use it, and always wipe it with a cleaning cloth to make it in good contact (be sure to cut off the power supply) ). Do not hit the metal pipe of the indoor temperature regulator to avoid affecting the sensitivity.
6. When the blast drying box is used, it is forbidden to touch the electrical parts of the space on the left side of the box or wipe it with a damp cloth and rinse with water. The power should be cut off during maintenance.
7. The power cord should not be wrapped around metal objects. It should not be placed in a place with high temperature or humidity to prevent the rubber from aging and causing leakage.
1. Do not put flammable materials in the dry box without explosion-proof device.
2. Before use, you must pay attention to whether the power supply voltage used is consistent. When using, the power outlet ground wire must be grounded as specified.
3. After each use of the blast drying oven, the power supply must be cut off, and the inside and outside of the box should be kept clean. Hang the corresponding logo after cleaning.
4. Do not over-squeeze the contents of the box, and leave room for natural convection of the air so that the humid air can accelerate on the wind top.
5 should regularly check whether the silver contact of the temperature regulator is hairy or uneven. If it is, use the fine gauze to level the contact, then use it, and always wipe it with a cleaning cloth to make it in good contact (be sure to cut off the power supply) ). Do not hit the metal pipe of the indoor temperature regulator to avoid affecting the sensitivity.
6. When the blast drying box is used, it is forbidden to touch the electrical parts of the space on the left side of the box or wipe it with a damp cloth and rinse with water. The power should be cut off during maintenance.
7. The power cord should not be wrapped around metal objects. It should not be placed in a place with high temperature or humidity to prevent the rubber from aging and causing leakage.
Various Surfaces PVC Coated Gloves
Various Surfaces Pvc Gloves,Polyster Linning Pvc Gloves,Two-Color Pvc Gloves,Red Sandy Finish Gloves
SHANDONG SHUNXING LABOUR PROTECTIVE CO.,LTD , https://www.sdsxlb.com